Karcher pressure washers are robust and long-lasting machines; they will facilitate you for a very long time. But, with time, some parts of these pressure washers get rusty and break. For instance, the Karcher pressure washer hose; after some time, it will get leaky. You will either have to replace or repair it. As repairing a hose is a long and tiresome process, we would recommend you to replace it. If you don’t know how to replace a Karcher pressure washer hose, don’t worry.
In this article, we will teach you how to replace a Karcher pressure washer hose. All you need to do is read and follow the steps carefully.
To replace the hose, you will need a Karcher pressure washer replacement kit. You can buy one from any Karcher pressure washer store. We would recommend you to buy the Karcher 26439100 trigger gun and 25ft replacement hose kit .
This kit includes equipment that is compatible with almost all Karcher pressure washer models. The kit also includes an adapter that you can use to connect the hose, in case you have a different connection type.
The hose provided in this replacement kit is a durable and flexible hose made of high-quality material. It is kink and abrasion resistant, so it should last longer than the hose you will be replacing it with.
Step 1:
First, you need to connect the Karcher spray gun to the hose. Because of the quick connect system, it is a lot easier to connect the hose to the spray gun. Fit the hose connector to the bottom of the spray gun; if it’s don’t correctly, you will hear a click sound.
Step 2:
After you have successfully connected the hose to the spray gun, you need to join the other end of the hose to your pressure washer’s outlet. If the connection type is different, you can use the adapter to connect the hose and spray gun. In case you quick connect seizes, you will have to use the WD-40 to lube it before disconnecting it.
Step 3:
After you have successfully connected both ends of the hose to the pressure washer spray gun and outlet, you need to test run the pressure washer. Please make sure the water pressure is low and then steadily increase the water pressure. If you have done it the right way, everything should be fine.
you may also like Why the pressure washer shuts off when you pull the trigger
Conclusion
Above were the most straight forward steps to replace a Karcher pressure washer hose. All you need to do is.
- Connect the hose’s one end to the spray gun
- Connect the other end to the pressure washer outlet
- Test run the pressure washer
In case you don’t find the replacement kit, you can also buy the best pressure washer hose. In that case, you will have to make sure the hose fitting matches your previous hose fittings. You can also save yourself some money by repairing the hose. For that, you must know how to fix a pressure washer hose.